Transform my trimmer into a three-wheeler.
Do you know the McCulloch, Craftsman, Husqvarna, Hyundia, and poulan Pro have the same boy-frame. They just have difference colors, most parts, companents are the same for these brands. I can almost sure that you do not know this.
The only problem with the walk-behind trimmers is: It is so difficult and frustrate trying to balance it during trimming. The reason for it because it rides only on the back two wheels, and the worse thing is: You have to push and hold down constantly on the handlebar to raise up the spin-cup from the ground, otherwise the trimmer will not move. Believe it or not. Unlike the lawnmowers, they are seated on four-wheels, easy to maneuver and control.
Ask the owner of these trimmers and see what they are going to tell you.
We have great news for you.
Introducing: the AWAP
The AWAP is an Aluminum plate, equipped with a 5″ caster swivel wheel. It can be installed on any walk-behind trimmers, regardless of what thier brands/modes.
It takes less than 10 minutes with two 7/16″ wrenches to install it on your trimmer.
You are gonne love your trimmer like you never did before. Thanks to the AWAP.
The left photo, I have to push down on the handlebar to raise the spin-cup up above the ground to be able to move the trimmer.
The right photo, do you see the trimmer seat on three-wheels, fat on the ground.
The spin-cup is 1/2″ above the ground.
The benefits of the AWAP:
. You can trim evenly hight, because you do not have to raise the spin-cup up above the ground, and the spin-cup is not at an angle, as before which you have to push down the handlebar, that created an angle, therefore you never achieve an even cut ‘height’.
. Now you can easily make a 360-degree turn by one hand if you wish. Get a lot more done quicly and way less pains.
The AWAP is a must-have add on for any walk-behind trimmers, regardless of what brands/models of the trimmers. The AWAP fits them all.
Don’t disappoint yourself like those owners
Operating this machine with out the AWAP
| Max. Cutting Height | 3.5" | Minimum Cutting Height | 1.5" |
| Assembled Width | 21" | Cutting Width | 22" |
| Assembled Height | 41.5″ | Wheel Size | 12" |
| Assembled Depth | 46.5″ | Line Diameter | .155 |
| Engine Displacement (cc) | 163 c | Handle Bar Positions | 1 |
| Engine Brand | Briggs & Stratton | Engine Type | 4 Cycles |
| Features | Adjustable, Foldable Handel Bar | Engine Start | Coil Start |
| Fuel Tank Capacity (gallons) | .25 | Oil Type | SAE 10W – 30W |
| Manufacturer Warranty | 2 Years Limited | Torque | 6.75 Lbs |
| Product Weight | 72 lbs | Assembly Required | Yes |
| Fuel Type | Gas | ||